GE Healthcare · X-ray VascularAdvantx
ADV, Error 3B is flashing on the TSSC, The system is operating normally.
Symptom
ADV, Error 3B is flashing on the TSSC, The system is operating normally. TSSC = Button Stuck Rotation Table Brake Release Error 3B is flashing on the TSSC, The system is operating normally. Error Message on the TSSC = Button Stuck Rotation Table Brake Release. Check the operation of the button on the TSSC that controls the Table rotation lock.
Error message
LC/LP+ Advantx ROOT CAUSE: TSSC Master Control Table Rotation Button Stuck: Error 3B
Applies to
- Models
- Advantx
- Product
- Advantx E Biplane Advantx E biplane systems: LCLP+ (22 cm II), LCN+ (32 cm II), LCALP+ (40 cm frontal plane, 32 cm lateral plane) Advantx E biplane systems: LCLP+ (22 cm II), LCN+ (32 cm II), LCALP+ (40 cm frontal plane, 32 cm lateral plane)
- Software
- AdxE: Zidane / Clarity releases Advantx E Zidane and Clarity releases. From Titan release G7 to Titan release G12. Advantx E Zidane and Clarity releases. From Titan release G7 to Titan release G12.
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor.
- Intermittent Gantry Lockup usually occurred when bagging the Detector or Removing the patient from the table.
- Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor.
- Omega, Can not move the table top in the lateral direction.
- The Advantx Console is Blank on boot of the system.
- Exabyte won't archive or eject