GE Healthcare · MROvation
Part Numbers for the Filters used on the Rear of the SSM.
Symptom
Part Numbers for the SSM Filters is Difficult to Find See Long Description There are 4 filters installed on the back of the SSM; 2-25 pin, 1-37 pin and 1-15 pin DB Filters. Missing filters can cause a drop in SNR due to higher noise values. This is due to a normal amount of noise from the power supplies in the SSM. Missing filters happens when the SSM is replaced and the filters are not transfered from the old unit to the new unit. Replacement SSM's do not include the filters.
Applies to
- Models
- Ovation
- Product
- Ovation/MFO
- Software
- MFO3 Applies to Ovation3 with HP4000 computer running Linux OS.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA ID100060 Unable To Film.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.
- Having Difficulties Setting Up Gradcal Scan From Dir 5112585 - Signa Ovation With Excite Technology
- CWA ID101091. Some or All Images in the Last Scan Did Not Reconstruct.
- HFO Cradle Will Not Move Due To Loss Of Home Flag Position.