GE Healthcare · Nuclear MedicineDiscovery
Ventri axis initialization failed, fails startup test and gantry reset
Symptom
Ventri axis initialization failed, fails startup test and gantry reset Ventri axis initialization failed. Fails startup test and gantry reset. Tried full powerdown including main power down on IPS unit, no change.
Error message
ERROR_STARTUP_TEST_FAILED ERROR_GCU_PSD_LOGICAL_TEST:.:GCU logical PSD test failure:.:1)Retry the last operation. 2)If PSD is pressed release the PSD and retry the operation. 3)If emergency button is pressed release the emergency button and retry the operation. 4)Perform Gantry Reset and retry the operation.:.: GCU logical PSD test failure description:GCU cannot synchronize with ROTOR .:.:Trace:{1} ERROR_STARTUP_TEST_FAILED:.:Startup test Caused by: failed:.:1. Try again 2. Restart the Application and try againApplies to
- Models
- Discovery
- Product
- Ventri Ventri Ventri Discovery NM 530c/570c Discovery NM 530c/570c (CZT) DSV NM 530c DSV NM 570c
- Component
- CBL500129 Ventri Table cable TSB-GSB CBL500129 Ventri Table cable TSB-GSB
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- VG Fanbeam collimators copying cor correction values
- Hawkeye X-Ray patient images ring artifacts
- Ventri failed system startup test, "LAST AXIS MOVEMENT FAILED"
- VG detectors radial 1 or radial 2 will not radial out in fast mode with RCU
- Ventri CAN Network Maping Initialization - ERROR_GCU_CAN_NETWORK_INITIALIZATION
- Venti or Discovery 530/570 Internal Host, DIB and GCU IP Address