GE Healthcare · MROvation
Cradle Will Only Move Out.
Symptom
Cradle Will Only Move Out Cradle cannot move forward, however, it only can move backward.
Error message
A single U is flashing on the left side of the magnet display No error codes are recorded in the system error log. The only indication of an error is displayed on the magnet.
Applies to
- Models
- Ovation
- Product
- Ovation with EXCITE
- Software
- OVATION5 Applies to Ovation5 (Excite) only. Ovation5 is 12.x platform software, not OvationHD.
- Component
- 5159604 Pinch Terminator Ovation5 and OvationHD do not have pinch sensors mounted in the magnet enclosure due to the elimination of the swing table. Terminator at J9 is used instead.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA ID100060 Unable To Film.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.
- Having Difficulties Setting Up Gradcal Scan From Dir 5112585 - Signa Ovation With Excite Technology
- CWA ID101091. Some or All Images in the Last Scan Did Not Reconstruct.
- HFO Cradle Will Not Move Due To Loss Of Home Flag Position.