GE Healthcare · X-ray VascularAdvantx
WARNING, Maximum exposure time reached.
Symptom
WARNING, Maximum exposure time reached. Error Displayed on ADX Console resulting in Light Images ADX Last Exposure was light error displayed on in room display and WARNING, Maximum exposure time reached is displayed on ADX console.
Error message
ADX 4265 displayed on Console ADX Error 4265 displayed on Console This is usually a status/informational message used for AEC applications. The exposurebackup timer timed out which indicates the exposure reached the maximum expose timeallowed for the given technique and was terminated by the backup timer rather than theAEC LUT sequencer hardware; this will result in a dim image. It also indicates a softwareerror in fixed mode applications when the backup timer is loaded with a value less than theexpose/rad timer. In this case the backup timer will always timeout before the expose/radtimer and the error will happen for every exposure.
Applies to
- Models
- Advantx
- Product
- Advantx E Monoplane Advantx E Systems advantx e, vamp Advantx E generator Systems
- Software
- All AdvantxE Software releases All AdvantxE Software releases All Advantx E Software releases
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor.
- Intermittent Gantry Lockup usually occurred when bagging the Detector or Removing the patient from the table.
- Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor.
- Omega, Can not move the table top in the lateral direction.
- The Advantx Console is Blank on boot of the system.
- Exabyte won't archive or eject