GE Healthcare · X-ray VascularAdvantx
ADV, During boot up in aplications is given collimator error code 4AB6 hw 009b .
Symptom
ADV, During boot up in aplications is given collimator error code 4AB6 hw 009b . System doesn't allow to get into collimator calibration.
Error message
ADV, collimator, 4ab6 , hw0009. Diagnostic error code : 9260 hardware status=009B
Applies to
- Models
- Advantx
- Product
- Advantx E Monoplane Advantx E Systems advantx e, vamp Advantx E generator Systems
- Software
- All AdvantxE Software releases All AdvantxE Software releases All Advantx E Software releases
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor.
- Intermittent Gantry Lockup usually occurred when bagging the Detector or Removing the patient from the table.
- Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor.
- Omega, Can not move the table top in the lateral direction.
- The Advantx Console is Blank on boot of the system.
- Exabyte won't archive or eject