GE Healthcare · X-ray VascularAdvantx
ADV, No L-Arm movement when L-arm command performed on the TSUI.
Symptom
ADV, No L-Arm movement when L-arm command performed on the TSUI. An error is displayed on the In Room Monitor. Error maybe 4AF1 ADV, No L-Arm movement when L-arm command performed on the TSUI. An error (4AF1) is displayed on the In Room Monitor. Error maybe 4AF1
Error message
4AF1 HW Status=0000 User=1000 In the system errlog, error 4AF1 HW Status=0000 User=1000 when trying to move L-arm using the TSUI command.
Applies to
- Models
- Advantx
- Product
- Advantx, LFX Advantx product line LFX Advantx product line Advantx E Monoplane Advantx E Systems advantx e, vamp Advantx E generator Systems Advantx E Biplane Advantx E biplane systems: LCLP+ (22 cm II), LCN+ (32 cm II), LCALP+ (40 cm frontal plane, 32 cm lateral plane) Advantx E biplane systems: LCLP+ (22 cm II), LCN+ (32 cm II), LCALP+ (40 cm frontal plane, 32 cm lateral plane)
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor.
- Intermittent Gantry Lockup usually occurred when bagging the Detector or Removing the patient from the table.
- Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor.
- Omega, Can not move the table top in the lateral direction.
- The Advantx Console is Blank on boot of the system.
- Exabyte won't archive or eject